Removal

METER: COMBINATION METER: REMOVAL

1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY





(a) Using a screwdriver, detach the 4 clips, 6 claws and remove the instrument cluster finish panel.

HINT
Tape the screwdriver tip before use.

4. REMOVE COMBINATION METER ASSEMBLY





(a) Remove the 2 screws.

(b) Pull the combination meter as indicated by the arrow in the illustration to detach the 2 clips.

(c) Disconnect the connector and remove the combination meter.