Installation

AUDIO / VIDEO: MULTI-MEDIA INTERFACE ECU: INSTALLATION

1. INSTALL MULTI-DISPLAY CONTROLLER BRACKET A

(a) Install the multi-display controller bracket A with the 2 bolts.

Torque : 2.0 Nm (20 kgf-cm, 17 in-lbf)





2. INSTALL MULTI-MEDIA INTERFACE ECU

(a) Connect the connector.

(b) Install the multi-media interface ECU with the nut.

Torque : 8.0 Nm (80 kgf-cm, 70 in-lbf)





3. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY

(a) Install the instrument panel Installation.

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. CHECK SRS WARNING LIGHT Installation