Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> Sequoia 2WD V8-5.7L (3UR-FE) >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Air Injection >> Service and Repair >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





3UR-FE EMISSION CONTROL: AIR INJECTION DRIVER: INSTALLATION

1. INSTALL AIR INJECTION CONTROL DRIVER (for Bank 2)





(a) Install the air injection control driver with the 2 screws.

Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

2. INSTALL AIR INJECTION CONTROL DRIVER (for Bank 1)





(a) Install the air injection control driver with the 2 screws.

Torque : 2.0 Nm (20 kgf-cm, 18 in-lbf)

(b) Install the 2 bolts.

Torque : 5.0 Nm (51 kgf-cm, 44 in-lbf)

3. INSTALL AIR INJECTION CONTROL DRIVER ASSEMBLY





(a) Install the air injection control driver with the 3 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the 2 wire harness clamps.





(c) Install the ground cable with the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(d) Connect the 4 air injection control driver connectors.




pro multis · About Operation CHARM