Installation

JF3A TRANSFER / 4WD / AWD: 4WD CONTROL ECU: INSTALLATION

1. INSTALL 4WD CONTROL ECU

(a) Install the ECU with the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)





(b) Connect the 2 ECU connectors.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH Installation

3. INSTALL INSTRUMENT SIDE PANEL RH Installation

4. INSTALL COWL SIDE TRIM BOARD RH

(a) Install the cowl side trim board RH Installation.

HINT
Use the same procedures described for the LH side.

5. INSTALL FRONT DOOR SCUFF PLATE RH

(a) Install the front door scuff plate RH Installation.

HINT
Use the same procedures described for the LH side.