Installation

SEAT: SEAT CONTROL RECEIVER: INSTALLATION

1. INSTALL SEAT CONTROL RECEIVER

(a) Engage the guide and install the door control receiver with the bolt.

Torque : 7.5 Nm (76 kgf-cm, 66 in-lbf)

(b) Connect the connector.

2. INSTALL REAR NO. 2 WINDOW SIDE GARNISH ASSEMBLY LH Installation

3. INSTALL QUARTER TRIM PANEL ASSEMBLY LH Installation

4. INSTALL SLIDE DOOR WEATHERSTRIP LH

5. INSTALL REAR DOOR SCUFF PLATE LH

HINT
Use the same procedure as for the RH side Installation.

6. INSTALL REAR NO. 2 SEAT OUTER BELT ASSEMBLY LH

HINT
Use the same procedure as for the RH side Installation.

7. INSTALL BACK DOOR SCUFF PLATE Installation

8. INSTALL BACK DOOR WEATHERSTRIP

9. INSTALL ROOF HEADLINING REAR GARNISH Installation