Installation

2GR-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL VVT SENSOR (for Intake Side of Bank 1)

(a) Apply a light coat of engine oil to the O-ring of the sensor.





Text in Illustration





NOTICE:
* When reusing the sensor, inspect the O-ring.
* If the O-ring has scratches or cuts, replace the sensor.

(b) Install the sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the sensor connector.

2. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)

(a) Apply a light coat of engine oil to the O-ring of the sensor.





Text in Illustration





NOTICE:
* When reusing the sensor, inspect the O-ring.
* If the O-ring has scratches or cuts, replace the sensor.

(b) Install the sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the sensor connector.

3. INSTALL VVT SENSOR (for Intake Side of Bank 2)

(a) Apply a light coat of engine oil to the O-ring of the sensor.





Text in Illustration





NOTICE:
* When reusing the sensor, inspect the O-ring.
* If the O-ring has scratches or cuts, replace the sensor.

(b) Install the sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the sensor connector.

4. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)

(a) Apply a light coat of engine oil to the O-ring of the sensor.





Text in Illustration





NOTICE:
* When reusing the sensor, inspect the O-ring.
* If the O-ring has scratches or cuts, replace the sensor.

(b) Install the sensor with the bolt.

Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the sensor connector.

5. INSTALL INTAKE AIR SURGE TANK ASSEMBLY

Installation

6. ADD ENGINE COOLANT Service and Repair

7. INSPECT FOR COOLANT LEAK Testing and Inspection

8. INSPECT FOR OIL LEAK