Installation

POWER DISTRIBUTION: POWER MANAGEMENT CONTROL ECU: INSTALLATION

1. INSTALL POWER MANAGEMENT CONTROL ECU





(a) Engage the 2 claws and install the power management control ECU.

2. INSTALL ECU INTEGRATION BOX RH Installation

3. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY Installation

4. INSTALL COWL SIDE TRIM BOARD RH Installation

5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

6. INSTALL DOOR SCUFF PLATE ASSEMBLY RH Installation

7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.