Installation

U660F AUTOMATIC TRANSMISSION / TRANSAXLE: TCM: INSTALLATION

1. INSTALL TCM

(a) Install the TCM onto the automatic transaxle.





(b) Install and tighten the 2 bolts in the order shown in the illustration.

Torque : 11 Nm (115 kgf-cm, 8 ft-lbf)

(c) Connect the connector.





Text in Illustration





(d) Turn the lock lever and secure the connector with the lock lever.

2. INSTALL BATTERY Installation

3. INSTALL AIR CLEANER INLET ASSEMBLY Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

(a) When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

5. CHECK AUTOMATIC TRANSAXLE SYSTEM

NOTICE:
If automatic transaxle parts are replaced, refer to Parts Replacement Compensation Table to determine if any additional operations are necessary Service Precautions.