Removal

NETWORKING: NETWORK GATEWAY ECU: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE DOOR SCUFF PLATE ASSEMBLY RH Removal

3. REMOVE COWL SIDE TRIM BOARD RH Removal

4. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP RH

5. REMOVE GLOVE COMPARTMENT DOOR SUB-ASSEMBLY Removal

6. REMOVE ECU INTEGRATION BOX RH Removal

7. REMOVE NETWORK GATEWAY ECU





(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the network gateway ECU.

Text in Illustration