Installation

CELLULAR COMMUNICATION: MAYDAY ECU: INSTALLATION

1. INSTALL MAYDAY ECU ASSEMBLY

(a) Engage the guide and install the bracket with the screw.

(b) Engage the claw and install the mayday ECU.

(c) Tighten the nut.

(d) Connect the connectors onto the mayday ECU.

2. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY Installation

3. INSTALL COWL SIDE TRIM BOARD RH Installation

4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

5. INSTALL DOOR SCUFF PLATE ASSEMBLY RH Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.