Removal
FRONT SUSPENSION: FRONT SUSPENSION MEMBER: REMOVAL
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (for 2GR-FE)
Removal
2. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (for 1AR-FE)
Removal
3. REMOVE FRONT NO. 1 STABILIZER BRACKET LH Removal
4. REMOVE FRONT NO. 1 STABILIZER BRACKET RH
HINT
Perform the same procedure as the LH side.
5. REMOVE FRONT STABILIZER BAR
6. REMOVE STEERING LINK ASSEMBLY Removal
7. SEPARATE FRONT ENGINE MOUNTING INSULATOR ASSEMBLY Removal
8. SEPARATE ENGINE MOUNTING INSULATOR LH Removal
9. SEPARATE ENGINE MOUNTING INSULATOR RH Removal
10. SEPARATE REAR ENGINE MOUNTING INSULATOR ASSEMBLY (for AWD) Removal
11. REMOVE FRONT ENGINE MOUNTING INSULATOR ASSEMBLY
(a) Remove the hole plug.
(b) Remove the 3 nuts and front engine mounting insulator assembly.
12. REMOVE ENGINE MOUNTING INSULATOR LH
(a) Remove the 2 hole plugs.
(b) Remove the 3 nuts and engine mounting insulator LH.
13. REMOVE ENGINE MOUNTING INSULATOR RH
(a) Remove the 2 hole plugs.
(b) Remove the 3 nuts and engine mounting insulator RH.
14. REMOVE REAR ENGINE MOUNTING INSULATOR ASSEMBLY (for AWD)
(a) Remove the 2 hole plugs.
(b) Remove the 2 nuts and rear engine mounting insulator assembly.
NOTICE:
Do not remove the rear engine mounting insulator assembly through bolt. Doing so makes it difficult to install the rear engine mounting insulator assembly.
15. REMOVE FRONT SUSPENSION MEMBER DYNAMIC DAMPER (for 2WD)
(a) Remove the 2 bolts and front suspension member dynamic damper.
16. REMOVE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH Removal
17. REMOVE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT
Perform the same procedure as the LH side.
18. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT STOPPER
19. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR STOPPER
20. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING FRONT CUSHION
(a) Install SST as shown in the illustration.
Text in Illustration
SST : 09830-10010
09830-01010
09830-01040
09830-01050
SST : 09950-40011
09951-04020
09952-04010
09954-04010
09955-04011
(b) Using SST, remove the front suspension member body mounting front cushion.
Text in Illustration
NOTICE:
* Make sure that the claws of SST are securely hung onto the mounting front cushion.
* Tighten SST slowly and evenly.
* Be careful as the mounting front cushion may fly out.
* The mounting front cushion cannot be reused.
21. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION LH
(a) Install SST as shown in the illustration.
SST : 09830-10010
09830-01010
09830-01040
09830-01050
SST : 09950-40011
09951-04020
09952-04010
09954-04010
09955-04011
Text in Illustration
(b) Using SST, remove the front suspension member body mounting rear cushion LH.
Text in Illustration
SST : 09830-10010
09830-01010
09830-01040
09830-01050
SST : 09950-40011
09951-04020
09952-04010
09954-04010
09955-04011
NOTICE:
* Make sure that the claws of SST are securely hung onto the mounting rear cushion.
* Tighten SST slowly and evenly.
* Be careful as the mounting rear cushion may fly out.
* The mounting rear cushion cannot be reused.
22. REMOVE FRONT SUSPENSION MEMBER BODY MOUNTING REAR CUSHION RH
HINT
Perform the same procedure as the LH side.