Initialization

METER / GAUGE / DISPLAY: METER / GAUGE SYSTEM: INITIALIZATION

1. OIL MAINTENANCE REMINDER RESETTING PROCEDURE

HINT
The MODE switch knob is located on the lower left side of the combination meter assembly.

(a) Turn the ignition switch to ON.

(b) Press the MODE switch knob until the TRIP A meter appears.

(c) Turn the ignition switch off.

(d) Turn the ignition switch to ON while pressing and holding the MODE switch knob. Hold the MODE switch knob until the following conditions are met and 5 seconds have passed.

(1) The TRIP A meter shows "000000".

(2) The master warning light illuminates.

(3) When "000000" disappears and the master warning light turns off, the resetting procedure is complete.