Installation

1AR-FE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION

1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

(a) Install a new gasket onto the engine coolant temperature sensor.

(b) Using a 19 mm deep socket wrench, install the engine coolant temperature sensor.

Torque : 20 Nm (200 kgf-cm, 14 ft-lbf)

(c) Connect the engine coolant temperature sensor connector.

2. INSTALL AIR CLEANER ASSEMBLY Installation

3. INSTALL BATTERY Installation

4. INSTALL AIR CLEANER INLET ASSEMBLY Installation

5. ADD ENGINE COOLANT Service and Repair

6. INSPECT FOR COOLANT LEAK Testing and Inspection

7. INSTALL NO. 1 ENGINE UNDER COVER Installation