Front Door Window Regulator: Testing and Inspection

WINDOW / GLASS: POWER WINDOW REGULATOR MOTOR (for Front Door): INSPECTION

1. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH

(a) Apply positive (+) battery voltage to connector terminal 2 (B).





NOTICE:
Do not apply positive (+) battery voltage to any terminals other than terminal 2 (B) to avoid damaging the pulse sensor inside the motor.

(b) Connect a ground lead to connector terminals 1 (GND) and 7 (DOWN) or 10 (UP).

(c) Check that the motor gear rotates smoothly as follows:

OK:





Text in Illustration





* If the result is not as specified, replace the power window regulator motor LH.

CAUTION:
Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator onto the door.

2. INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH

(a) Apply positive (+) battery voltage to connector terminal 2 (B).





NOTICE:
Do not apply positive (+) battery voltage to any terminals other than terminal 2 (B) to avoid damaging the pulse sensor inside the motor.

(b) Connect a ground lead to connector terminals 1 (GND) and 7 (DOWN) or 10 (UP).

(c) Check that the motor gear rotates smoothly as follows:

OK:





Text in Illustration





* If the result is not as specified, replace the power window regulator motor RH.

CAUTION:
Reset the power window regulator motor (initialize the pulse sensor) after installing the power window regulator motor and regulator onto the door.