Removal

1GR-FE ENGINE CONTROL SYSTEM: CRANKSHAFT POSITION SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. REMOVE V-BANK COVER Removal

3. REMOVE FAN SHROUD Removal

4. REMOVE GENERATOR ASSEMBLY Removal

5. SEPARATE COOLER COMPRESSOR ASSEMBLY





(a) Remove the bolt, then separate the suction hose sub-assembly.

(b) Disconnect the cooler compressor assembly connector.





(c) Remove the 4 bolts, then separate the cooler compressor assembly from the V-ribbed belt tensioner assembly.

6. REMOVE CRANKSHAFT POSITION SENSOR





(a) Disconnect the crankshaft position sensor connector.

(b) Remove the bolt, then remove the crankshaft position sensor.