Removal

1GR-FE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

2. DRAIN ENGINE COOLANT Service and Repair

3. REMOVE V-BANK COVER Removal

4. REMOVE AIR CLEANER ASSEMBLY Removal

5. REMOVE VVT SENSOR





(a) RH bank side VVT sensor:

(1) Disconnect the VVT sensor connector.

(2) Remove the bolt and VVT sensor.

(b) LH bank side VVT sensor:





(1) Disconnect the water by-pass hoses No. 4 and No. 5.

(2) Disconnect the VVT sensor connector.

(3) Remove the bolt and VVT sensor.