Body - General Maintenance

MAINTENANCE: BODY: GENERAL MAINTENANCE

1. TIGHTEN BOLTS AND NUTS ON CHASSIS AND BODY

(a) Tighten the bolts and nuts on the chassis parts listed below, if necessary.

* Front axle and suspension

* Drive train

* Rear axle and suspension

* Brake system

* Engine mounting

* Other chassis parts

(b) Tighten the bolts and nuts on the body parts listed below, if necessary.

* Seat belt system

* Seats

* Doors and hood

* Body mountings

* Fuel tank

* Exhaust pipe system

* Other body parts

2. REPLACE CLEAN AIR FILTER SUB-ASSEMBLY

(a) Remove the glove compartment assembly.

(b) Remove the filter case from the filter outlet.

(c) Remove the filter from the filter case.

(d) Replace the filter with a new one.

(e) The installation procedures are the removal procedures in reverse order.