Installation

A340E AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: INSTALLATION

1. INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY





(a) Install the park/neutral position switch onto the manual valve lever shaft and provisionally tighten the adjusting bolt.

(b) Install the grommet, a new lock washer and the nut.





Torque : 6.9 Nm (70 kgf-cm, 61 in-lbf)

(c) Install the manual valve lever shaft onto the groove and turn it 2 notches counterclockwise to the neutral position.

(d) Align the neutral basic line with the switch groove and tighten the adjusting bolt.

Torque : 13 Nm (130 kgf-cm, 9 ft-lbf)

(e) Bend the tabs of the lock washer.

HINT
Bend at least 2 of the lock washer tabs.

2. CONNECT PARK/NEUTRAL POSITION SWITCH CONNECTOR

3. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY Adjustments

4. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY Adjustments

5. ADJUST SHIFT LEVER POSITION Adjustments

6. INSPECT SHIFT LEVER POSITION Adjustments