Woofer Speaker Power Source Circuit

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: Woofer Speaker Power Source Circuit
- Woofer Speaker Power Source Circuit

DESCRIPTION

This circuit provides power to the No. 1 speaker assembly with box.

WIRING DIAGRAM





INSPECTION PROCEDURE

NOTICE:
Inspect the fuses for circuits related to this system before performing the following inspection procedure.

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (NO. 1 SPEAKER ASSEMBLY WITH BOX - BATTERY AND BODY GROUND)

(a) Disconnect the S30 No. 1 speaker assembly with box connector.





(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:





(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:





Text in Illustration





NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Problem Symptoms Table