Installation

SEAT: REAR SEAT ASSEMBLY (for Access Cab): INSTALLATION

1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY

HINT
Use the same procedure for the side.

(a) Install the child restraint seat anchor bracket sub-assembly with the 2 bolts.

Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)

(b) Close the floor carpet.

2. INSTALL REAR SEAT HEADREST ASSEMBLY

(a) Install the 2 rear seat headrest assemblies with the 8 bolts.

Torque : 20 Nm (204 kgf-cm, 15 ft-lbf)

3. INSTALL BACK PANEL TRIM Installation

4. INSTALL BACK PANEL TRIM COVER Installation

5. INSTALL BACK PANEL GARNISH HOLE PLUG Installation

6. INSTALL REAR SEAT CUSHION ASSEMBLY

(a) Install the 2 rear seat cushion assemblies with the 6 bolts.

Torque : 29 Nm (296 kgf-cm, 21 ft-lbf)

7. INSTALL NO. 1 SPEAKER ASSEMBLY WITH BOX Installation

8. INSTALL NO. 2 SPEAKER MOUNTING COVER Installation

9. INSTALL SPEAKER MOUNTING COVER Installation