Installation

1GR-FE EMISSION CONTROL: AIR INJECTION DRIVER (w/ Secondary Air Injection System): INSTALLATION

1. INSTALL INJECTOR DRIVER BRACKET

(a) Install the injector driver bracket with the 2 screws.

2. INSTALL AIR INJECTION CONTROL DRIVER

(a) Install the air injection control driver with 2 bolts.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)

(b) Connect the 2 air injection control driver connectors.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque : 5.4 Nm (55 kgf-cm, 48 in-lbf)