Removal

SUSPENSION: FRONT UPPER SUSPENSION ARM (for 4WD and Pre-Runner): REMOVAL

1. REMOVE FRONT WHEEL

2. INSPECT FRONT SUSPENSION UPPER ARM

(a) Check that there is no slack on the ball joint by shaking the upper arm up and down by hand.

3. SEPARATE SKID CONTROL SENSOR WIRE





(a) Remove the 2 bolts, and separate the skid control sensor wire.

4. REMOVE FRONT SUSPENSION UPPER ARM





(a) Support the front suspension lower arm LH with a jack.

(b) Remove the clip and nut.

(c) Using SST, separate the upper ball joint from the steering knuckle.

SST : 09628-62011

(d) Remove the bolt and bracket.





(e) Remove the bolt, 2 washers and nut.





(f) Remove the front suspension upper arm.