Installation

SUSPENSION: REAR STABILIZER BAR (for Sport Suspension Package): INSTALLATION

1. INSTALL REAR STABILIZER BAR





(a) Install the 2 stabilizer bushes onto the stabilizer bar.

HINT
Install the stabilizer bush onto the outer side of the mark on the stabilizer bar.

(b) Install the stabilizer bar and 2 stabilizer brackets with the 4 bolts.





Torque : 27 Nm (275 kgf-cm, 20 ft-lbf)

2. INSTALL REAR STABILIZER LINK ASSEMBLY LH





(a) Install the stabilizer link with the 2 nuts.

Torque : 65 Nm (663 kgf-cm, 48 ft-lbf)

HINT
If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud.

3. INSTALL REAR STABILIZER LINK ASSEMBLY RH

NOTICE:
The installation procedure for the RH side is the same as that for the LH side.

4. INSTALL REAR WHEEL

Torque : 113 Nm (1152 kgf-cm, 83 ft-lbf)