Reassembly

SUSPENSION: FRONT SHOCK ABSORBER (for 4WD and Pre-Runner): REASSEMBLY

1. INSTALL FRONT COIL SPRING





(a) Using SST, compress the front coil spring.

SST : 09727-30021

09727-00010

09727-00031

SST : 09727-00060

NOTICE:
Do not use an impact wrench. It will damage SST.

(b) Install the front coil spring onto the shock absorber front.

HINT
Fit the lower end of the front coil spring into the gap of the spring lower seat.

2. INSTALL FRONT SHOCK ABSORBER CUSHION RETAINER

3. INSTALL FRONT SUSPENSION SUPPORT SUB-ASSEMBLY

4. INSTALL FRONT SHOCK ABSORBER CUSHION NO. 1

5. INSTALL FRONT SHOCK ABSORBER CUSHION RETAINER

6. INSTALL FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT





(a) Align the suspension support and the absorber bush as shown in the illustration.

(b) Fit and tighten a new lock nut.

Torque : 27 Nm (275 kgf-cm, 20 ft-lbf)

NOTICE:
Do not use an impact wrench. It will damage the shock absorber rod.

(c) Release the coil spring while checking the position of the suspension support.