Installation

A750E AUTOMATIC TRANSMISSION: FLOOR SHIFT ASSEMBLY: INSTALLATION

1. INSTALL FLOOR SHIFT ASSEMBLY





(a) Install the floor shift with the 4 bolts.

Torque : 14 Nm (143 kgf-cm, 10 ft-lbf)

(b) Connect the 2 clamps and 2 connectors.

2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY





(a) CABLE TYPE:

(1) Connect the transmission control cable with the clip to floor shift assembly.

(2) Install the transmission control cable onto the floor shift assembly.

3. INSTALL FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY





(a) ROD TYPE:

(1) Install the floor shift gear shifting rod with nut.

Torque : 5.5 Nm (56 kgf-cm, 49 in-lbf)

4. INSTALL FRONT CONSOLE BOX Installation

5. INSTALL INSTRUMENT PANEL CUP HOLDER TRAY Installation

6. INSTALL REAR CONSOLE BOX ASSEMBLY Installation

7. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY Installation

8. ADJUST SHIFT LEVER POSITION Adjustments

9. INSPECT SHIFT LEVER POSITION Adjustments