Removal (from 08/2011)

AIR CONDITIONING: AIR CONDITIONING AMPLIFIER: REMOVAL

1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Service Precautions.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

3. REMOVE FRONT DOOR SCUFF PLATE RH

(a) for Regular Cab:

Remove the front door scuff plate Removal (from 08/2011).

(b) for Double Cab:

Remove the front door scuff plate Removal (from 08/2011).

(c) for CrewMax:

Remove the front door scuff plate Removal (from 08/2011).

4. REMOVE COWL SIDE TRIM BOARD RH

(a) for Regular Cab:

Remove the cowl side trim board Removal (from 08/2011).

(b) for Double Cab:

Remove the cowl side trim board Removal (from 08/2011).

(c) for CrewMax:

Remove the cowl side trim board Removal (from 08/2011).

5. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

(a) for Column Shift Type:

Remove the No. 2 instrument panel under cover sub-assembly Removal (from 08/2011).

(b) for Floor Shift Type:

Remove the No. 2 instrument panel under cover sub-assembly Removal (from 08/2011).

6. REMOVE INSTRUMENT SIDE PANEL RH

(a) for Column Shift Type:

Remove the instrument side panel Removal (from 08/2011).

(b) for Floor Shift Type:

Remove the instrument side panel Removal (from 08/2011).

7. REMOVE LOWER INSTRUMENT PANEL

(a) for Column Shift Type:

Remove the lower instrument panel Removal (from 08/2011).

(b) for Floor Shift Type:

Remove the lower instrument panel Removal (from 08/2011).

8. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

(a) for Column Shift Type:

Remove the No. 2 instrument panel airbag assembly Removal (from 08/2011).

(b) for Floor Shift Type:

Remove the No. 2 instrument panel airbag assembly Removal (from 08/2011).

9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH

(a) for Column Shift Type:

Remove the instrument panel finish panel Removal (from 08/2011).

(b) for Floor Shift Type:

Remove the instrument panel finish panel Removal (from 08/2011).

10. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY





(a) Remove the screw and duct.

11. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY





(a) for Manual Air Conditioning System:

Disconnect the 2 connectors.

(b) for Automatic Air Conditioning System:

Disconnect the 3 connectors.

(c) Remove the 2 screws and amplifier.