Installation

POWER STEERING: POWER STEERING ECU (for 1UR-FE): INSTALLATION

1. INSTALL POWER STEERING ECU ASSEMBLY





(a) Install the power steering ECU with the nut.

Torque : 8.5 Nm (87 kgf-cm, 75 in-lbf)

(b) Connect the power steering ECU connector.

2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation (from 08/2011)

3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY Installation

4. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH Installation (from 08/2011)

5. INSTALL INSTRUMENT SIDE PANEL LH Installation (from 08/2011)

6. INSTALL COWL SIDE TRIM BOARD LH Installation (from 08/2011)

7. INSTALL FRONT DOOR SCUFF PLATE LH Installation (from 08/2011)