Installation

JF1A TRANSFER: 4WD CONTROL ECU: INSTALLATION

1. INSTALL 4WD CONTROL ECU

(a) Install the ECU with the bolt.

Torque : 8.0 Nm (82 kgf-cm, 71 in-lbf)





(b) Connect the 2 ECU connectors.

2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH Installation (from 08/2011)

3. INSTALL INSTRUMENT SIDE PANEL RH Installation (from 08/2011)

4. INSTALL COWL SIDE TRIM BOARD RH

(a) Install the cowl side trim board RH Installation (from 08/2011).

HINT
Use the same procedures described for the LH side.

5. INSTALL FRONT DOOR SCUFF PLATE RH (for Regular Cab)

(a) Install the front door scuff plate RH Installation (from 08/2011).

HINT
Use the same procedures described for the LH side.

6. INSTALL FRONT DOOR SCUFF PLATE RH (for Double Cab, for CrewMax)

(a) Install the front door scuff plate RH Installation (from 08/2011).

HINT
Use the same procedures described for the LH side.