Removal

JF1A TRANSFER: 4WD CONTROL ECU: REMOVAL

1. REMOVE FRONT DOOR SCUFF PLATE RH (for Regular Cab)

(a) Remove the front door scuff plate RH Removal (from 08/2011).

HINT
Use the same procedures described for the LH side.

2. REMOVE FRONT DOOR SCUFF PLATE RH (for Double Cab, for CrewMax)

(a) Remove the front door scuff plate RH Removal (from 08/2011).

HINT
Use the same procedures described for the LH side.

3. REMOVE COWL SIDE TRIM BOARD RH

(a) Remove the cowl side trim board RH Removal (from 08/2011).

HINT
Use the same procedures described for the LH side.

4. REMOVE INSTRUMENT SIDE PANEL RH Removal (from 08/2011)

5. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH Removal (from 08/2011)

6. REMOVE 4WD CONTROL ECU

(a) Disconnect the 2 ECU connectors.





(b) Remove the bolt and ECU.