Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2012 >> Venza FWD L4-2.7L (1AR-FE) >> Repair and Diagnosis >> Starting and Charging >> Charging System >> Alternator >> Service and Repair >> Removal and Replacement >> Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Installation





1AR-FE BATTERY / CHARGING: GENERATOR: INSTALLATION

1. INSTALL GENERATOR ASSEMBLY

(a) Install the generator with the 2 bolts.





Torque : 52 Nm (530 kgf-cm, 38 ft-lbf)

(b) Install the wire harness clamp bracket with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(c) Connect the generator wire with the nut.

Torque : 9.8 Nm (100 kgf-cm, 87 in-lbf)

(d) Install the terminal cap.

(e) Connect the generator connector.

2. INSTALL WIRE HARNESS CLAMP BRACKET

(a) Install the clamp bracket with the bolt.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Attach the wire harness clamp to the clamp bracket.

3. INSTALL V-RIBBED BELT

HINT
Installation

4. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY Installation

5. INSTALL COOL AIR INTAKE DUCT SEAL Installation

6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

pro multis · About Operation CHARM