Installation

2GR-FE ENGINE CONTROL: CAMSHAFT POSITION SENSOR: INSTALLATION

1. INSTALL VVT SENSOR

(a) Install the 4 sensors with the 4 bolts.





Torque : 10 Nm (102 kgf-cm, 7 ft-lbf)

(b) Connect the 4 sensor connectors.

2. INSTALL INTAKE AIR SURGE TANK ASSEMBLY Installation

3. INSTALL AIR CLEANER CAP WITH HOSE Installation

4. ADD ENGINE COOLANT Service and Repair

5. INSPECT FOR COOLANT LEAK Testing and Inspection

6. INSPECT FOR OIL LEAK

7. INSTALL V-BANK COVER SUB-ASSEMBLY Installation

8. INSTALL COOL AIR INTAKE DUCT SEAL Installation

9. INSTALL COWL TOP PANEL OUTER SUB-ASSEMBLY Installation

10. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

(a) Install the windshield wiper motor and link assembly Installation.

11. INSTALL NO. 2 ENGINE UNDER COVER

12. INSTALL NO. 1 ENGINE UNDER COVER