Operation CHARM: Car repair manuals for everyone.
Home >> Toyota >> 2013 >> Corolla L4-1.8L (2ZR-FE) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Information Bus >> Testing and Inspection >> Pinout Values and Diagnostic Parameters >> LIN Communication System
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

LIN Communication System





NETWORKING: LIN COMMUNICATION SYSTEM: TERMINALS OF ECU; 2013 MY Corolla [07/2012 -]

1. CHECK MAIN BODY ECU (INSTRUMENT PANEL JUNCTION BLOCK)

(a) Disconnect the 2B, 2E, 2F and 2G junction block and E51 ECU connectors.









(b) Measure the voltage and resistance according to the value(s) in the table below.





* *: w/o Smart Key System

If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the 2B, 2E, 2F and 2G junction block and E51 ECU connectors.

(d) Measure the pulse according to the value(s) in the table below.





If the result is not as specified, the ECU may have a malfunction.

2. CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)





(a) Disconnect the E36 ECU connector.

(b) Measure the voltage and resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the E36 ECU connector.

(d) Measure the voltage and pulse according to value(s) in the table below.





If the result is not as specified, the ECU may have a malfunction.

3. CHECK ID CODE BOX (IMMOBILISER CODE ECU)





(a) Disconnect the E22 ECU connector.

(b) Measure the voltage and resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the E22 ECU connector.

(d) Measure the pulse according to value(s) in the table below.





If the result is not as specified, the ECU may have a malfunction.

4. CHECK STEERING LOCK ECU (STEERING LOCK ACTUATOR ASSEMBLY)





(a) Disconnect the E39 ECU connector.

(b) Measure the voltage and resistance according to the value(s) in the table below.





If the result is not as specified, there may be a malfunction on the wire harness side.

(c) Reconnect the E39 ECU connector.

(d) Measure the pulse according to value(s) in the table below.





If the result is not as specified, the ECU may have a malfunction.
pro multis · About Operation CHARM