Wiper Blades - Jerk or Skip Across Windshield
GROUP: 92NUMBER: 95-02
DATE: April 10, 1995
SUBJECT:
Wiper Blades, skipping
MODEL(s):
All Models m.y. 1976
Condition:
Customer complaint: Windshield wipers jerk or skip across the windshield
Service
Possible causes for skipping wiper blades:
^ Windshield scratched
^ Wiper blade rubber loose/torn, replace
^ Wiper arms/blades loose/bent, replace
^ Wiper blades waxed/deformed, replace
^ Incorrect contact angle of wiper arm
If the first four items above are not the cause adjust the wiper arm angle as follows;
- Set wiper arms to rest position.
- Remove wiper blade.
- Insert wiper arm -2- into wiper arm adjustment tool 3358 and secure with retaining bolt -3-.
- Apply 24 mm wrench-1- to the adjustment tool and twist -arrows- wiper arm -2- according to table (see table).
- Remove wiper arm -2- from adjustment tool with retaining bolt -3- then reinstall and recheck.
- Check setting using table. If necessary, the setting and checking procedure should be repeated until specified value is attained.
- Remove adjustment tool and install wiper blades.