Engine - Flywheel, Drive or Pressure Plate Bolts

84VW03
Applies To RABBIT, JETTA, SCIROCCO,
CONVERTIBLE, PICKUP,
QUANTUM
Group


13
Subject

Flywheel

Part Identifier N/A
Key Points

Torque converter drive plate/clutch pressure plate bolts

A - 74
Number


84-01

January 16, 1984
All engines which have the flywheel, drive plate or pressure plate attached to the crankshaft with 10 x 1 x 20 mm bolts either use bolts without shoulder, Part No. N 900 720.01, or with shoulder, Part No.. N 902 061.01

Note

During repairs, these bolts must be replaced.



In order to standardize tightening methods and torques only bolts with shoulder will be supplied as service parts when those without shoulder have been used up.
CAUTION

Part numbers are for reference only. Always check with your Parts Department for latest parts information.