Sensor Plate Lever - Basic Adjustment
85VW2Applies To ALL
Group
25
Subject
CIS-E
Part Identifier N/A
Key Points
Sensor plate lever, basic adjustment
B
Number
85-01
March 29, 1985
Sensor plate lever, basic adjustment
Note
Always perform basic adjustment of lever when replacing fuel distributor or air flow sensor..
Work sequence
- check distance between fuel distributor contact surfaces on air flow sensor and roller for sensor plate lever. If necessary, adjust with mixture adjustment screw using tool P-377.
4 cylinder engines
^ specified value: 19.0 +/- 0.1 mm (0.748 +/- 0.004 in.)
5 cylinder engines
^ specified value: 21.0 +/- 0.1 mm (0.827 +/- 0.004 in.)