Coolant Hoses, Flange, Clamps - Updated
85VW2Applies To
GOLF,
GTI
1985/1986
Group
19
Subject
Coolant Hose, Flange, Clamps
Part Identifier 1963
Key Points
Modified flange, coolant hoses, clamps
C
Number
85-04
December 9, 1985
Spring type (A) coolant hose clamps are now used exclusively.. New parts are identified by:
- coolant hose
^ has smooth inner surface and identified by spring clamp symbol (B)
- flange on cylinder head
^ approximately 5 mm (13/64 in.) longer and now machined (previously cast)
^ raised ridge (C) slightly higher
To insure proper sealing of coolant hose, position clamp 4 mm (5/32 in.) from end of hose.
Note
Earlier style parts may be used if correct parts are unavailable. However, worm type clamps with closed serrations must be used.