Drive Shaft Removal

- Loosen mounting bolt of front final drive (arrow) Do NOT remove bolt

CAUTION: Front final drive mounts MUST be loosened to prevent damage to the driveshaft universal joints when removing driveshafts.





- Loosen side bolts of front final drive mounting bracket (arrow) Do NOT remove bolts

CAUTION: The installed position of the driveshaft must be noted for reinstallation. Vibrations due to incorrect installation can cause cracks in the transmission housing or engine block.





- Remove bolts (arrow) at front and rear driveshaft flanges and remove driveshaft

NOTE: The universal joints cannot be replaced using standard workshop tools and are not available as replacement parts.