Operation CHARM: Car repair manuals for everyone.
Home >> Volkswagen >> 1989 >> Vanagon Syncro AWD F4-2109cc 2.1L (MV) >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Testing and Inspection >> Checking Ignition Switching Function
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Checking Ignition Switching Function



Checking ignition switching function from control unit

Requirements

Ignition coil OK
Electrical checks (wiring and component checks) OK






- Connect digital multimeter US 1119 between terminal 1 (-) and terminal 15 (+) of ignition coil
- Disconnect Hall sender (on distributor)
- Switch ignition ON






- Hold center wire of connector from distributor to ground for approx. 3 seconds
Displayed voltage must increase briefly to approx. 4.5 volts

If NO
- Replace control unit
pro multis · About Operation CHARM