Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Computers and Control Systems: Adjustments

1. Run engine until it reaches operating temperature. Ensure cold start cable is not pulled out. Turn all electrical accessories off.
2. Place engine RPM sensor adapter tool No. VW 1324 or equivalent, on cylinder head cover and connect to battery.
3. Install positive lead of tester tool No. VW 1367 or equivalent, to adapter tool No. VW 1324 or equivalent, and negative lead to ground.
4. If idle speed is not within specifications, adjust as follows:
a. Loosen idle adjusting screw locknut.
b. Adjust idle speed screw, turning clockwise to increase RPM or counterclockwise to decrease RPM.
c. Tighten locknut.