Federal
COIL WIREWire (complete) resistance 1200 - 2800 ohms
Wire (only) resistance approx. 0 ohm
Cap connector resistance 600 - 1400 ohms
Coil connector resistance 600 - 1400 ohms
IGNITION COIL
Resistance between terminals 1 (-) and 15 (+) :
Coil W/ green label 0.52 - 0.76 ohms
Coil W/ gray label 0.6 - 0.8 ohms
Resistance between terminals 4 (center) and 15 (+) :
Coil W/ green label 2400 - 3500 ohms
Coil W/ gray label 6900 - 8500 ohms
IGNITION TIMING [1]
2250 ± 50 RPM Coolant temperature sensor disconnected
Checking 4° - 8° BTDC
Adjust to 6° - 1° BTDC
PLUG WIRES
Wire (complete) resistance 4600 - 7400 ohms
Wire (only) resistance approx. 0 ohm
Cap connector resistance 600 - 1400 ohms
Plug connector resistance 4000 - 6000 ohms
ROTOR
Resistance 600 - 1400 ohms
[1] Ignition timing, idle speed and CO need to be adjusted together to prevent driveablity problems. For complete procedure, refer to ADJUSTMENT PROCEDURES.