Heater Core

1 Gasket
- Replace
2 Heat exchanger
- Gaskets must be glued, free of gaps all around.
- If catches do not engage when installing, then secure heat exchanger with screws.
3 Clip
4 Gasket
5 Air duct with main shut-off flap
- Do not disassemble further
6 Series resistor -N24-
7 Fresh air blower -V2-
8 Air duct cover
9 Plug
10 Cables
11 Fresh air and heated air controls
12 Pedal cluster cover
13 Footwell vent
14 Temperature flap lever
15 Center flap lever
16 Air distribution housing
- Do not disassemble further.
17 Intermediate piece
18 Gasket
- Replace