Requirements and General Information

CHECKING REQUIREMENTS
- Proper adjustment of measuring equipment
- Vehicle at curb weight (1)
- Tire pressures at specification (2)
- Vehicle positioned precisely
- Suspension bounced several times
- No excessive play or damage to steering or linkage
- No excessive play or damage to suspension

WHEN TO CHECK ALIGNMENT
- After at least 1000-2000 km (600-1200 miles), once coil springs have settled
- Thereafter as needed, and following certain service procedures noted in this Repair Manual

NOTES
(1) Curb weight is weight of vehicle ready for the road:
- Full fuel tank
- Equipped with spare wheel
- Equipped with tool kit, if included
- Equipped with vehicle jack
(2) Tire sizes and pressures:
- Refer to specification label on vehicle, located on passenger-side rear door pillar (B-pillar on 2-door vehicles, C-pillar on 4-door vehicles)