Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Cylinder Head Torque & Sequence

CYLINDER HEAD:

Cylinder Head Tightening Sequence:

Tightening Torques [1]:
Stage I: 40 Nm (30 ft lb)
Stage II: 60 Nm (44 ft lb)
Stage III: plus 1/4 turn (90°)
Stage IV: plus 1/4 turn (9O°)

Camshaft Bearing Caps:
20 Nm (15 ft lb)

_____________________________________
[1]: Always replace the cylinder head bolts. They are stretch-type bolts designed to be used only once. Tighten the new head bolts in stages using the sequence shown.