Rear Crankshaft Main Bearing Seal

LEGEND
1 Auxiliary Shaft Oil Seal
2 Woodruff Key
3 Bolt
4 Front Sealing Flange
5 Gasket
6 Cylinder Block
7 Bolt
8 Flywheel/Drive Plate
9 Bolt
10 Intermediate Plate
11 Sealing Flange With Oil Seal
12 Front Crankshaft Oil Seal
13 Auxiliary Shaft
14 O-ring
15 Sealing Flange For Auxiliary Shaft

TIGHTENING SPECIFICATIONS


Bolt (3)
- Tighten to: 25 Nm (18 ft. lbs.).


Bolt (7)
- Tighten in two stages:
- First stage, tighten to: 60 Nm (44 ft. lbs.).
- Second stage, turn an additional: 90° (1/4 turn).


Bolt (9)
- Tighten to: 10 Nm (7 ft. lbs.).