Wheel Bearing

1 Wheel Bolt,
- Tighten to: 110 Nm (81 ft. lbs.)

2 Self-Locking 12-point Nut
- Tighten to: 90 Nm (66 ft. lbs.) and turn 45° further (1/8)
- Loosening and tightening, refer to Transmission and Drivetrain
- Any paint residue and/or corrosion on thread of the outer joint must be removed before the nut is installed.

3 Screw

4 Brake Disc
- Repair instructions, refer to Brakes and Traction Control.

5 Brake Caliper
- Do not loosen brake hose when working on front suspension
- Hang up with wire or similar
- Replacing brake pads, refer to Brakes and Traction Control.

6 Countersunk Screw

7 Hub

8 Speed Sensor Rotor
- Only for vehicles with ABS

9 Hex Bolt
- Tighten to: 10 Nm (82 inch lbs.)

10 Splash Plate

11 Circlip
- Ensure seated correctly

12 Wheel Bearing
- Always replace, as it is destroyed during pressing out

13 Self-Locking Hex Nut
- Tighten to: 35 Nm (26 ft. lbs.)

14 Wheel Bearing Housing

15 Self-Locking Bolt/Washer
- Tighten to: 125 Nm (92 ft. lbs.)

16 Drive Shaft
- Removing installing, refer to 98
- Repairing, refer to Transmission and Drivetrain

17 Socket Head Multi-Point Bolt
- Tighten to: 45 Nm (33 ft. lbs.)

18 Hex Bolt
- Camber adjustment.
- Before loosening mark installation position

19 Hex Bolt

20 Bracket

21 Stop

22 Self-Locking Hex Nut
- Tighten to: 60 Nm (44 ft. lbs.)

23 Suspension Strut
- Disassembling and assembling, refer to Servicing

24 Self-Locking Hex Nut
- Tighten to: 95 Nm (70 ft. lbs.)

25 Tie Rod
- Removing installing. Service and Repair