01M Transmission
NOTE: The basic setting should be initiated after performing the following repairs:^ Exchanging engine.
^ Replacing Engine Control Module (ECM).
^ Replacing/altering throttle valve.
^ Adjusting throttle valve (setting idling speed).
^ Replacing Throttle Position (TP) Sensor -G69-.
^ Altering Throttle Position Sensor -G69- setting.
^ Replacing Transmission Control Module (TCM) -J217-.
BASIC SETTING, INITIATING
- Connect Scan Tool (ST) VAG 1551 and enter address word "02 Transmission electronics" and advance until "Select function XX" appears in the display.
^ Indicated on display:
Rapid data transfer HELP
Select function XX
- Press keys 0 and 4.
- The function "Initiating basic setting" is selected with 04.
NOTE: Accelerator Pedal must remain in Closed Throttle Position.
^ Indicated on display:
Rapid data transfer Q
04 - Basic setting
- Confirm entry with key Q.
^ Indicated on display:
Basic setting HELP
Enter display group number XX
- Press keys 0 and 0.
- Confirm entry with key Q.
^ Indicated on display:
System in basic setting 0 -->
- The system is now in basic setting.
- Depress Accelerator Pedal as far as kickdown and hold in this position for 3 seconds.
- Press key -->.
^ Indicated on display:
Rapid data transfer HELP
Select function XX