Rear Door, Assembly Overview

Rear Door, Assembly Overview

NOTE: Bolts for door hinges must always be replaced after loosening.







1 - Door
2 - Door handle with backing plate
3 - Housing
- Removing, remove as for lock cylinder housing.

4 - Concealment cap
5 - Bolt
- 20 Nm

6 - Securing knob
7 - Locking rod
8 - Bell crank
9 - Locking rod
10 - Bolt
- 20 Nm

11 - Lock plate
12 - Door lock
- Cover was introduced as a running change in production for lock. It is clipped onto lock.

13 - Bowden cable
14 - Interior release handle
15 - Bolt
- M8 X 28
- Only this bolt must be Removed to remove door from hinge.
- 20 Nm + 1/4 turn. (90°).
- Always replace bolt after loosening.

16 - Door hinge with door arrester
- Hinge is divided.

17 - Bolt
- M8 X 28
- Only this bolt must be Removed to remove door from hinge.
- 20 Nm + 1/4 turn. (90°).
- Always replace bolt after loosening.

18 - Concealment cap
19 - Set screw
- 23 Nm

20 - Door hinge
- Hinge is divided.

21 - Bolt
- 20 Nm + 1/4 turn. (90°).
- Always replace bolts after loosening.