Fuel Injection Component Locations Overview

Component locations, overview







1 - Oxygen sensor 1 before Three Way Catalyst G39
2 - Oxygen sensor 2 after Three Way Catalyst G130
3 - Engine - Coolant Temperature sensor G62
4 - Throttle Body Control Module J338
5 - 4-pin harness connector
- Brown for Oxygen sensor 1 G39
6 - 4-pin harness connector
- Black for Oxygen sensor 2 G130
7 - 3-pin harness connector
- Grey for engine speed sensor G28
8 - 3-pin harness connector
- Green for knock sensor 1 G61
9 - 3-pin harness connector
- Blue for knock sensor 2 G66
10 - Barometric sensor F96
- Installing location: In protective housing, plenum chamber, left
11 - Engine Control Module J220
- Installing location: In protective housing, plenum chamber, left
12 - Intake Air - Temperature sensor G42
13 - Engine speed sensor G28
14 - Knock sensor 2 G66
15 - Knock sensor 1 G61
16 - Fuel pressure regulator
17 - Camshaft Position sensor G40
18 - Fuel Injector N30, N31, N32, N33
19 - Ignition coils N, N128, N158 and N163
20 - Wastegate Bypass Regulator Valve N75
21 - Ground - connection
- On engine support, right
22 - Mass Air Flow sensor G70
23 - Power output stage N122
24 - EVAP canister purge regulator valve 1 N80
- On Air Cleaner
- Evaporative emissions system (EVAP)