Reading
Read Measured Value Block
WARNING!
- Only visual check of wiring!
- Do not perform electrical continuity tests or measurements to ignition circuits!
- Only check wiring with ignition switched Off!
Indicated on display
Rapid data transfer HELP
Select function XX
- Press keys -0- and -8- (08 initiates the "Read Measured Value Block" function).
Indicated on display
Rapid data transfer Q
08 - Read Measured Value Block
- Confirm with -Q- key.
Indicated on display
Read Measured Value Block HELP
Input display group number XXX
- Select display group number and confirm entry with -Q- key.
Indicated on display (1-4 = display fields)
Read Measured Value Block 1 ->
1 2 3 4
The explanation of the individual display groups on the display is found in the evaluation of display group numbers.
If the displayed values in all display groups are "correct."
- Press -> key.
Indicated on display
Rapid data transfer HELP
Select function XX
NOTE: Check DTC memory after completing the function "Read Measured Value Block".