Removing and Installing Wiper Motor From Frame

Removing Wiper Motor From Frame







- Pry linkages -1- from wiper motor crank using a large screwdriver.
- Remove M8 hex nut -2-.
- Remove wiper motor crank.
- Remove all M6 mounting bolts -3-.

Installing wiper motor in frame


NOTE: Ensure that wiper motor is in park position. If necessary, connect the electrical connector and operate wiper switch briefly. Electrical connector must be disconnected again prior to installation.


- Install all M6 hex bolts to secure motor.
Tightening torque: 8 Nm (71 in lb)